Calibration Charts | Case = STA1W_C4T , Cell = C4 | 05/31/05 | |||||||||||||||||
STA1W - Cell 4 | |||||||||||||||||||
Simulation Period | 08/01/94 | 03/31/05 | Inflow = G254 | ||||||||||||||||
Output Period: | 08/01/94 | 03/31/05 | Outflow = G309+G256 | ||||||||||||||||
Calibration Period: | 07/01/00 | 08/31/04 | |||||||||||||||||
Predicted Values for Calibration Period | Calibration Set: | SAV_3 | Paired Observed & Predicted Values | FW | Not FW | GM / | |||||||||||||
Mean Depth | 64 | cm | K | 52.5 | m/yr | Depth | Flow | Load | FWM | GM | GM | FWM | |||||||
Frequency Z < 10 cm | 0% | C0 | 3.0 | ppb | cm | cm/d | mg/m2-d | ppb | ppb | ppb | - | ||||||||
Mean Hyd Load | 17.5 | cm/d | C1 | 22 | ppb | Count | 51 | 51 | 51 | 51 | 51 | 51 | |||||||
Mean P Load | 7328 | mg/m2-yr | C2 | 300 | ppb | Observed | 66.4 | 17.2 | 9.79 | 56.9 | 37.1 | 35.9 | 0.65 | ||||||
Mean Flow/Width | 298 | m2/day | Z1 | 40 | cm | Predicted | 63.7 | 16.9 | 11.73 | 69.2 | 49.9 | 48.1 | 0.72 | ||||||
Hydraulic Resid Time | 4 | days | Z2 | 100 | cm | Mean Resid | 2.8 | 0.3 | -1.94 | -12.3 | -12.8 | -12.3 | -0.07 | ||||||
Inflow Conc | 114 | ppb | Z3 | 400 | cm | Bias % | 4% | 2% | -17% | -18% | -26% | -25% | -9% | ||||||
FWM Outflow Conc | 69 | ppb | Avg Int | 30 | days | Residual SE% | 24% | 16% | 16% | 210% | 45% | 45% | |||||||
GeoMn Outflow Conc | 50 | ppb | Area | 1.45 | km2 | ||||||||||||||
|
|||||||||||||||||||
green line on axis = calibration period | red symbols = observed | blue lines /symbols = predicted | Resid = observed - predicted, conc log-transformed |