DMSTA Simulation Results				Case:	OKEE_7578		Period:	1/1/1973	to	12/31/1981
Case:	calib to 1975-1978; observed concs in pelagic zone; simulation affected by intial condition
Input Series		OKEECHOBEE			Tanks in Series		1.0	Surface Area (km2)		1732.0000
Simulation Period		11/03/67	thru	12/31/81	Mean Water Load  (cm/d)		0.7	Mean Depth (cm)		254
Output Period		01/01/73	thru	12/31/81	Max Water Load (cm/d)		2.6	Max Depth (cm)		331
Calib Period		01/01/75		12/31/78	Inflow Conc  (ppb)		195.4	Freq Depth <  5 cm		0.0%
Startup Interval (days)		2616	Iterations	-5	Inflow P Load (mg/m2-yr)		271	Load Reduction		81%
Avg Interval (days)		90	Wtr Bal Error	0.0%	Outflow FWM  Conc (ppb)		62.9	Conc Reduction		68%
Parameter Set:		none	Mass B Error	0.0%	Outflow C with Bypass		62.9	Time Freq Conc > 10 ppb		36%
K (m/yr)		4.174	Kd (m/yr)	0	95th Percentile (ppb)		73.1	K - SS, C*=4 ppb (m/yr)		4.1
C1 (ppb)		150.0	Weir Depth (cm)	0	Outflow Geo. Mean (ppb)		58.2	Storage Turnover (1/yr)		9.1
C0  (ppb)		4.0	Cont Depth (cm)	0	Outflow GM,  Q>0 (ppb)		57.2	Mean Stored P (mg/m2)		374
C2 (ppb)		0	Qout Intercept	0.0	Seepage Loss		0%	Storage Inc/Net Removal		4%
Zx  (cm)		40	Qout Exponent	0.0	HRT (days)		1167.0	Outfl. Seepage (cm/d/cm)		0
Ki	E/m2-d	0	0	Model 2	Mean Biomass (g/m2)		#N/A	Biomass Turnover (1/yr)		#N/A
Kb	1/d	0	0	"	Gross PP  (g/m2-d)		#N/A	Total Resp (g/m2-d)		#N/A
Kr	1/d/g/m2	0	0	"
Ka	1/d	0	0	"
Kc	ppb	0	0	"
Ke	1/d	0	0	"
Ku	mg/m2	0	0	"
Calibration  Statistics for Period:			01/01/75	thru	12/31/78
						Mean	Mean
Inflow P Conc (ppb)  =		179	Count	Observed	Predicted	Residual	Resid%	RSE%	R2
Mean Depth (cm)			16	253.0	250.7	2.3	1%	1%	99%
Flow (cm/day)			16	0.18	0.19	-0.01	-4%	90%	20%
Flow-Wtd-Mean Conc (ppb)			16	55.8	57.2	-1.4	-2%
Geometric Mean Conc (ppb)			16	56.0	56.6	-0.6	-1%	36%	0%
Mean Conc (ppb)			16	59.4	56.7	2.7	5%	41%	0%
Outflow Load (mg/m2-d)			16	0.10	0.11	-0.01	-9%	97%	0%
Pred Q x Conc (mg/m2-d)			16	0.11	0.11	0.00	-2%	50%	44%
Conc Reduction (%)			16	69%	68%	0.01	1%
Obs Load2 = Predicted Flow x Observed Conc
Green lines on x axis of concentration plots indicate model calibration period.  Statistics at top of sheet are for entire output period.
03/02/05