DMSTA Simulation Results				Case:	OKEE_7986		Period:	1/1/1976	to	12/31/1989
Case:	calib to 1979-1986; observed concs in pelagic zone; simulation affected by intial condition
Input Series		OKEECHOBEE			Tanks in Series		1.0	Surface Area (km2)		1732.0000
Simulation Period		11/03/67	thru	12/31/89	Mean Water Load  (cm/d)		0.7	Mean Depth (cm)		263
Output Period		01/01/76	thru	12/31/89	Max Water Load (cm/d)		2.4	Max Depth (cm)		355
Calib Period		01/01/79		12/31/86	Inflow Conc  (ppb)		202.3	Freq Depth <  5 cm		0.0%
Startup Interval (days)		4077	Iterations	-5	Inflow P Load (mg/m2-yr)		272	Load Reduction		75%
Avg Interval (days)		90	Wtr Bal Error	0.0%	Outflow FWM  Conc (ppb)		80.6	Conc Reduction		60%
Parameter Set:		none	Mass B Error	-0.1%	Outflow C with Bypass		80.6	Time Freq Conc > 10 ppb		37%
K (m/yr)		3.120	Kd (m/yr)	0	95th Percentile (ppb)		90.0	K - SS, C*=4 ppb (m/yr)		2.9
C1 (ppb)		150.0	Weir Depth (cm)	0	Outflow Geo. Mean (ppb)		76.2	Storage Turnover (1/yr)		8.8
C0  (ppb)		4.0	Cont Depth (cm)	0	Outflow GM,  Q>0 (ppb)		76.4	Mean Stored P (mg/m2)		497
C2 (ppb)		0	Qout Intercept	0.0	Seepage Loss		0%	Storage Inc/Net Removal		-1%
Zx  (cm)		40	Qout Exponent	0.0	HRT (days)		1160.8	Outfl. Seepage (cm/d/cm)		0
Ki	E/m2-d	0	0	Model 2	Mean Biomass (g/m2)		#N/A	Biomass Turnover (1/yr)		#N/A
Kb	1/d	0	0	"	Gross PP  (g/m2-d)		#N/A	Total Resp (g/m2-d)		#N/A
Kr	1/d/g/m2	0	0	"
Ka	1/d	0	0	"
Kc	ppb	0	0	"
Ke	1/d	0	0	"
Ku	mg/m2	0	0	"
Calibration  Statistics for Period:			01/01/79	thru	12/31/86
						Mean	Mean
Inflow P Conc (ppb)  =		220	Count	Observed	Predicted	Residual	Resid%	RSE%	R2
Mean Depth (cm)			32	272.9	268.3	4.6	2%	2%	97%
Flow (cm/day)			32	0.27	0.26	0.01	5%	57%	75%
Flow-Wtd-Mean Conc (ppb)			32	102.2	85.7	16.6	19%
Geometric Mean Conc (ppb)			32	83.7	82.7	1.0	1%	29%	2%
Mean Conc (ppb)			32	87.4	82.9	4.5	5%	28%	0%
Outflow Load (mg/m2-d)			32	0.28	0.22	0.06	27%	77%	71%
Pred Q x Conc (mg/m2-d)			32	0.26	0.22	0.04	19%	49%	89%
Conc Reduction (%)			32	53%	61%	-0.08	-8%
Obs Load2 = Predicted Flow x Observed Conc
Green lines on x axis of concentration plots indicate model calibration period.  Statistics at top of sheet are for entire output period.
03/02/05